Product Introduction
Type 304L is a lower carbon variant of Grade 304 – the steel can be welded without the resulting issue of carbon precipitation (precipitation of chromium carbide as heat is applied during the welding process which depletes the chromium element of the steel thus reducing its anti-corrosive/oxidation effectiveness)
As a result, Type 304L stainless steel is a sought after material for use in severely corrosive conditions. Weld annealing is only necessary in applications where stress loads are excessive.
This steel Grade is found in a variety of commercial sectors, particularly in the chemical industry..
Product introduction:
| Commodity | 304L hot rolled stainless steel sheet |
| Grade | 304L |
| Brand | TISCO ,BAOSTEEL,POSCO,JISCO,LISCO |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Thickness | 3-120mm |
| Width | 1219,1500,2000mm or as per customers’ requirements |
| Length | 2000,3000,6000mm or as per customers’ requirements |
| Surface | No.1 |
| Standard | JIS,AISI,ASTM,GB,DIN |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | Low carbon content eliminates carbon precipitation in the welding processCan be used in severe corrosive environmentsWeld annealing only required in high stress applications |
Chemical Composition:
| Grade | Chemical Composition (WT %) | ||||||
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | |
| 304L | ≤ 0.03 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 1.00 | 18.0 to 20.0 | ≤ 9.0 to 13.0 |
Physical Property:
| Physical Property | |||||
| Tensile Strength（Mpa） | Yield Strength(Mpa) | Elongation(%) | / | Hardness(HV/HB) | Density |
| ≥480MPa | ≥175MPa | ≥40% | / | ≤200HV | 7.93g/cm3 |
Surface Finish:
